Wholesale Spy Cameras - Supplier For Spy Shops
DOWNLOAD THE APP P2PLiveCam from Google Play or APP Store.
CONNECT DIRECTLY TO THE CAMERA’S WIFI
If the camera has not been setup yet, the blue and red light will blink slowly to indicate that it is transmitting a local WIFI signal. Use your mobile phone to search for WIFI network. The WIFI name start with the letter CM. Connect to this network. Once connected to the network open the APP P2PLiveCam. From the main live video screen press the ADD(+) button in the top right corner.
Form the ADD Device screen tap ADD NEW ONLINE CAMERA to add camera.
Form the ADD NEW ONLINE CAMERA screen tap QR SCAN to use your phone’s camera to scan the sticker on the back of the camera or manually enter the UID.
You can also tap SEARCH LAN to see your camera. This will also show you the IP Address of your camera.
The camera can be named anything and the default password is 8888
Press OK to add camera and return to the main live view screen
Connecting to Internet
Once the camera is added the settings can be accessed by pressing the gear to the right of the camera.
Form the pop up menu press Device Settings.
Form the Advance Settings screen press WiFi Config.
On this screen select the WIFI network with sent by your home router and connect.
There will be a pop up prompt to input the password to connect to the WIFI network.
It will ask you want to connect to this network and when ok is pressed the camera will reboot. The light on the camera will blink for 30 seconds and then the red light turn solid and the blue night blink slowly once the clock connects to the WIFI network.You can now reconnect your phone or tablet to your home network WIFI.
Viewing live video
From the live video tab of the app, the cam will show up at the top and it will say online when it is functioning and connected correctly. Tap on the camera to bring up the live view.
Setting Time Stamp
To set time choose the Time settings menu from the Device Settings screen.This screen will allow you to set and sync the timestamp for the video so it is correct.
Recording to Memory
Enter the advanced config menu by tapping on the gear on the right side of the cam and selecting Advanced Config. Then selecting SD Card record config.
On this screen:
Sound on and off
Loop Recording on and off
Format (completely erase) the memory card
To activate motion detection based recording enter the alarm config menu form the Device Settings menu.From hare turn on the motion detection and set a sensitivity for alarm.
When the camera detects motion it will snap a photo and send an alert to the phone. To set the camera to record with motion capture you must enable alarm based recoding in the SDCARD Record config.
In the Device Settings menu enter the SDCard Record config menu. Form here set the record function to on-alarm. Other settings can also be changed on this screen such as file length for video recordings, sound recording on or off, and loop recording which will record over the old files when the memory card is full.
Video resolution 1920*1080 25fps
camera CMOS 2.0MP.OV92710
View angle 90 degree
Maximum capacity of memory card 128G