Embedded mounting in rear bumper.
Snap-in design, it is easy to install.
High sensitivity and low power consumption.
Water-proof, shock-proof and anti-jamming functions.
It helps to avoid incidents and accidents abrasion well.
Its simple and modest design and small size won't draw any attention.
This camera can give you a full sight of the back of your car when you are driving.
solution to get rid of that poor rear view visibility on your car,
boat, trailer, camper, truck or any vehicle that has no rear-view mirror
or poor rear vision.
to any type of monitor with a composite yellow RCA jack for crystal
clear resolution mounted inside will fit into most vehicle key holes, no
other installation needed.
Image Device: 1/4 inch color CMOS
TV system: PAL/NTSC
Effective pixels: 628 x 582 Pixels
Sensing area: 5.78 x 4.19mm
Sync. system: internal
Resolution: 420TV lines
Electronic Shutter: 1/50-1/10000 seconds
Minimum illumination: 0.3Lux/F1.2
Lens angle: 170°
S/N ratio: more than 48db(AGC-OFF)
Video output: RCA CONNECTOR, 1.0VP-P, 75ohm
Current Consumption: ≤150mA
Power supply: DC 12V
Operating Temperature: -30°C to +50°C, RH95%
Storage temperature: -40°C to +60°C, RH95% Max.
Video cable length: 5m
Power supply cable length: 1.2m
Size: 545 x 140 x 30mm (L x W x H)
1 x Europe license plate frame with rearview camera
1 x Video Cable
1 x Power Cable