Wholesale Spy Cameras - Spy Cameras China Factory Supplier
Product structure analysis:
Note: the machine can be divided into three types, which can be used according to the model ordered.
1. Machine one: direct power on, machine connect power supply can start. RESET hole or key (RESET).
2. Machine two: switch machine key, short press switch machine key, machine starts up. The switch must be flashing at a red light, then press the switch button for about 5 seconds to turn off the switch. RESET hole or key (RESET). If the blue light is long and the red light doesn't blink, the battery of the machine battery is dead and needs to be charged.
3. Model 3: ON/OFF toggle switch, the ON representative is turned ON, and OFF means shutdown. RESET hole or key (RESET)。
Indicator light scintillation:
After starting up, the blue light will be bright. After waiting, the red light will blink continuously. The specific mode of the indicator light is as follows:
1. Short range mode: red light is slow flash and represents the near - range mode. This mode camera and mobile phone are about 10 meters away.
2. Remote mode: red light flashes quickly, representing remote mode. In this mode, you need to press the RESET button (RESET). After the indicator lamp is out, the machine can restart and switch to the short-range mode.
3. Remote camera has been configured: red and blue lights are always on.
4. When it is not clear what mode, reset the camera to switch to point-to-point approach mode.
Note: according to the model, RESET button (RESET) needs to be pressed to the RESET button. The reset must be used to press the reset button at a red light flash or slow flash. Press the reset button for 5 seconds or so the machine indicator will go out and let the camera start.
1. Scan the qr code directly (figure 1) and enter the download page (figure 2). Download the software according to your mobile phone system.
2. Android is searching for HDMiniCam APP on Google Play and downloading and installing it.
Apple searches the App Store for HDMiniCam App to download the installation.
(figure 2) Android ApK Android phone download.
(figure 2) IPhone/IPad AppStore IPhone download.
Note: if you use the WeChat scan, you will be able to share it in the top right corner at the top right corner when you appear (figure 2). Android phones are opened in the browser and you can download the software. Apple's mobile phone system opens in Safari, and you can download the software.
Download the installation to complete the backhand
Point-to-point connection camera
Into the cell phone setting of wi-fi signals inside, find WIFI signal from the machine itself, the signal is divided into 2 kinds, beginning CM or PQ (this signal is the UID number every machine is a machine only) click and connection. This is what you see here。
Then turn on the phone APP (HDMiniCam) and click on the + sign shown above to add the camera。
This is shown in the figure below. (note: according to mobile phone, new camera will automatically pop up)
Set the camera to connect remotely
1. After the success of the short-range connection, you cannot exit the software and then configure the wifi connection to connect the remote.
2. The camera could not be far from the WIFI device, and the camera could not search for WIFI signals. WIFI wireless password must not enter the error.
3. If the connection does not succeed, it needs to be reset, first connected to the short distance, in connection with the remote.
Copyright © 2008-2020 Wholesale Spy Cameras - Spy Cameras China Factory Supplier - AllSpyCameras.com SITEMAP